Bola: Baja bantalan AISI 52100, Perlakuan panas, HRC56 min; Tanah presisi, berlapis krom keras yang dipoles
Tubuh: Baja paduan yang diberi perlakuan panas, Berlapis seng;
Ras: Aditif PTFE polimer nilon
Permukaan kontak geser: Baja/Nylon
Bola: Baja bantalan AISI 52100, Perlakuan panas, HRC56 min; Tanah presisi, berlapis krom keras yang dipoles
Tubuh: Baja paduan yang diberi perlakuan panas, Berlapis seng;
Ras: Aditif PTFE polimer nilon
Permukaan kontak geser: Baja/Nylon
| bantalan no. | Dimensi (mm/inci) |
Bola
dia
|
a°
salah.
sudut
|
Memuat
peringkat
(KN)
|
bobot
kg
_
|
|||||||
|
d+0,038
- 012
|
B | C1 | d2 |
d3
UNF-2A
|
h | L1 | (L2) | |||||
| NXM3 | 4.826 | 7.92 | 6.35 | 15.88 | 10-32 | 31.75 | 19.05 | 39.69 | 11.11 | 10 | 12.6 | 0,013 |
| NXM3 | 0.1900 | 0,312 | 0.250 | 0,625 | 10-32 | 1.250 | 0,750 | 1.562 | 0,437 | 10 | 12.6 | 0,013 |
| NXM4 | 6.35 | 9.53 | 7.14 | 19.05 | 1/4-28 | 39.67 | 25.4 | 49.2 | 12,7 | 13 | 23.3 | 0,018 |
| NXM4 | 0.2500 | 0,375 | 0,281 | 0,750 | 1/4-28 | 1.562 | 1.000 | 1.937 | 0,500 | 13 | 23.3 | 0,018 |
| NXM5 | 7.938 | 11.10 | 8.74 | 22.23 | 16/5-24 | 47.63 | 31.75 | 58,75 | 15.88 | 10 | 33.9 | 0,031 |
| NXM5 | 0,3125 | 0,437 | 0,344 | 0,875 | 16/5-24 | 1,875 | 1.250 | 2.312 | 0,625 | 10 | 33.9 | 0,031 |
| NXM6 | 9.525 | 12,7 | 10.31 | 25.4 | 3/8-24 | 49.22 | 31.75 | 61.92 | 18.26 | 9 | 42.4 | 0,049 |
| NXM6 | 0,3750 | 0,500 | 0,406 | 1.000 | 3/8-24 | 1.938 | 1.250 | 2.687 | 0,719 | 9 | 42.4 | 0,049 |
| NXM7 | 11.112 | 14.27 | 11.1 | 28.58 | 16/7-20 | 53,98 | 34.93 | 68.27 | 20.62 | 11 | 45.7 | 0,068 |
| NXM7 | 0,4375 | 0,562 | 0,437 | 1.125 | 16/7-20 | 2.125 | 1,375 | 2.678 | 0.812 | 11 | 45.7 | 0,068 |
| NXM8 | 12,7 | 15.88 | 12,7 | 33.32 | 1/2-20 | 61.92 | 38.1 | 78.58 | 23.8 | 9 | 72.2 | 0.108 |
| NXM8 | 0,5000 | 0,625 | 0,500 | 1.312 | 1/2-20 | 2.438 | 1.500 | 3.093 | 0,937 | 9 | 72.2 | 0.108 |
| NXM10 | 15.875 | 19.05 | 14.27 | 38.1 | 5/8-18 | 66.68 | 41.28 | 85,73 | 28.58 | 11 | 79.8 | 0,163 |
| NXM10 | 0,6250 | 0,750 | 0,562 | 1.500 | 5/8-18 | 2.625 | 1.625 | 3.375 | 1.125 | 11 | 79.8 | 0,163 |
| NXM12 | 19.05 | 22.23 | 17,45 | 44.45 | 3/4-16 | 73.02 | 44.45 | 95.25 | 33.33 | 10 | 124,9 | 0.258 |
| NXM12 | 0,7500 | 0,875 | 0,687 | 1.750 | 3/4-16 | 2.875 | 1.750 | 3.750 | 1.312 | 10 | 124,9 | 0.258 |
Dapat memasok ujung batang dengan nada atau akurasi ulir yang berbeda.
Untuk ulir kiri, akhiran "L" ditambahkan ke nomor bantalan. misalnya: NXML12 3/4-16L
Request for Quotation
