Bola: Baja bantalan AISI 52100, Perlakuan panas, HRC56 min;
Presisi tanah dipoles krom keras berlapis
Tubuh: Paduan baja, Perlakuan panas, Berlapis seng, Perlakuan kromat
Ras: Paduan baja, Perlakuan panas, Berlapis seng, Perlakuan kromat
Permukaan kontak geser: Komposit baja/PTFE
| bantalan no. | Dimensi (mm/inci) |
Bola
dia
|
a°
salah.
sudut
|
Memuat
peringkat
(KN)
|
bobot
kg
_
|
|||||||
|
d+0,038
- 012
|
B | C1 | d2 |
d3
UNF-2A
|
h | L1 | (L2) | |||||
| JMX3T | 4.826 | 7.92 | 6.35 | 15.88 | 10-32 | 31.75 | 19.05 | 39.69 | 11.11 | 13 | 12.6 | 0,013 |
| JMX3T | 0.1900 | 0,312 | 0.250 | 0,625 | 10-32 | 1.250 | 0,750 | 1.562 | 0,437 | 13 | 12.6 | 0,013 |
| JMX4T | 6.35 | 9.53 | 7.14 | 19.05 | 1/4-28 | 39.67 | 25.4 | 49.2 | 12,7 | 16 | 23.4 | 0,018 |
| JMX4T | 0.2500 | 0,375 | 0,281 | 0,750 | 1/4-28 | 1.562 | 1.000 | 1.937 | 0,500 | 16 | 23.4 | 0,018 |
| JMX5T | 7.938 | 11.10 | 8.74 | 22.23 | 16/5-24 | 47.63 | 31.75 | 58,75 | 15.88 | 14 | 33.9 | 0,031 |
| JMX5T | 0,3125 | 0,437 | 0,344 | 0,875 | 16/5-24 | 1,875 | 1.250 | 2.312 | 0,625 | 14 | 33.9 | 0,031 |
| JMX6T | 9.525 | 12,7 | 10.31 | 25.4 | 3/8-24 | 49.22 | 31.75 | 61.92 | 18.26 | 12 | 42.4 | 0,049 |
| JMX6T | 0,3750 | 0,500 | 0,406 | 1.000 | 3/8-24 | 1.938 | 1.250 | 2.437 | 0,719 | 12 | 42.4 | 0,049 |
| JMX7T | 11.112 | 14.27 | 11.1 | 28.58 | 16/7-20 | 53,98 | 34.93 | 68.27 | 20.62 | 14 | 45.7 | 0,072 |
| JMX7T | 0,4375 | 0,562 | 0,437 | 1.125 | 16/7-20 | 2.125 | 1,375 | 2.678 | 0.812 | 14 | 45.7 | 0,072 |
| JMX8T | 12,7 | 15.88 | 12,7 | 33.32 | 1/2-20 | 61.92 | 38.1 | 78.58 | 23.8 | 12 | 72.2 | 0.113 |
| JMX8T | 0,5000 | 0,625 | 0,500 | 1.312 | 1/2-20 | 2.438 | 1.500 | 3.093 | 0,937 | 12 | 72.2 | 0.113 |
| JMX10T | 15.875 | 19.05 | 14.27 | 38.1 | 5/8-18 | 66.68 | 41.28 | 85,73 | 28.58 | 16 | 79.8 | 0,172 |
| JMX10T | 0,6250 | 0,750 | 0,562 | 1.500 | 5/8-18 | 2.625 | 1.625 | 3.375 | 1.125 | 16 | 79.8 | 0,172 |
| JMX12T | 19.05 | 22.23 | 17.45 | 44.45 | 3/4-16 | 73.02 | 44.45 | 95.25 | 33.33 | 14 | 124,9 | 0,272 |
| JMX12T | 0,7500 | 0,875 | 0,678 | 1.750 | 3/4-16 | 2.875 | 1.750 | 3.750 | 1.312 | 14 | 124,9 | 0,272 |
| JMX14T | 22.225 | 22.23 | 17.45 | 50.8 | 7/8-14 | 85,73 | 47.63 | 111.1 | 33.33 | 10 | 247.7 | 0,408 |
| JMX14T | 0,8750 | 0,875 | 0,687 | 2.000 | 7/8-14 | 3.375 | 1,875 | 4.375 | 1.312 | 10 | 247.7 | 0,408 |
| JMX16T | 25.4 | 34.93 | 25.4 | 74,93 | 5/4-12 | 104.78 | 53,98 | 139.7 | 47.62 | 14 | 476.7 | 1.241 |
| JMX16T | 1.0000 | 1,375 | 1.0000 | 2.950 | 5/4-12 | 4.125 | 2.125 | 5.500 | 1,875 | 14 | 476.7 | 1.241 |
| JMX16-1T | 25.4 | 34.93 | 25.4 | 74,93 | 1-14 | 104.78 | 53,98 | 139.7 | 47.62 | 14 | 476.7 | 1.117 |
| JMX16-1T | 1.0000 | 1,375 | 1.0000 | 2.950 | 1-14 | 4.125 | 2.125 | 5.500 | 1,875 | 14 | 476.7 | 1.117 |
Catatan: Untuk alat kelengkapan gemuk tambahkan "Z" pada akhiran. Contoh: JMX6Z
Untuk stud tambahkan "Y" ke akhiran. Contoh: JMX5Y
Dapat memasok ujung batang dengan nada atau akurasi ulir yang berbeda.
Untuk ulir kiri, akhiran "L" ditambahkan ke nomor bantalan. misalnya: JMXL12T 3/4-16L
Request for Quotation
