Bola: AISI 52100 bantalan Baja, perlakuan panas, HRC56 min;
Berlapis krom keras yang dipoles dengan presisi
Tubuh: Baja karbon, berlapis seng bening.
Ras: komposit PTFE atau kain PTFE
Permukaan kontak geser: Baja/PTFE
Bola: AISI 52100 bantalan Baja, perlakuan panas, HRC56 min;
Berlapis krom keras yang dipoles dengan presisi
Tubuh: Baja karbon, berlapis seng bening.
Ras: komposit PTFE atau kain PTFE
Permukaan kontak geser: Baja/PTFE
| bantalan no. | Dimensi (mm/inci) |
Bola
dia
|
a°
salah.
sudut
|
Memuat
peringkat
(KN)
|
bobot
kg
_
|
|||||||
|
d+0,038
- 012
|
B | C1 | d2 |
d3
UNF-2A
|
h | L1 | (L2) | |||||
| CM3T | 4.826 | 7.92 | 5,94 | 15.88 | 10-32 | 31.75 | 19.05 | 39.69 | 11.112 | 13 | 4.4 | 0,013 |
| 0.1900 | 0,312 | 0.234 | 0,625 | 10-32 | 1.250 | 0,750 | 1.562 | 0,437 | 13 | 4.4 | 0,013 | |
| CM4T | 6.35 | 9.53 | 6.35 | 19.05 | 1/4-28 | 39.67 | 25.4 | 49.2 | 12,7 | 18 | 8.2 | 0,018 |
| 0.2500 | 0,375 | 0.250 | 0,750 | 1/4-28 | 1.562 | 1.000 | 1.937 | 0,500 | 18 | 8.2 | 0,018 | |
| CM5T | 7.938 | 11.10 | 7.92 | 22.23 | 16/5-24 | 47.63 | 31.75 | 58,75 | 15.875 | 14 | 12,7 | 0,031 |
| 0,3125 | 0,437 | 0,312 | 0,875 | 16/5-24 | 1,875 | 1.250 | 2.312 | 0,625 | 14 | 12,7 | 0,031 | |
| CM6T | 9.525 | 12,7 | 9.11 | 25.4 | 3/8-24 | 49.22 | 31.75 | 61.92 | 18.263 | 14 | 14 | 0,049 |
| 0,3750 | 0,500 | 0,359 | 1.000 | 3/8-24 | 1.938 | 1.250 | 2.437 | 0,719 | 14 | 14 | 0,049 | |
| CM7T | 11.112 | 14.27 | 10.31 | 28.58 | 16/7-20 | 53,98 | 34.93 | 68.27 | 20.625 | 13 | 17.6 | 0,068 |
| 0,4375 | 0,562 | 0,406 | 1.125 | 16/7-20 | 2.125 | 1,375 | 2.678 | 0.812 | 13 | 17.6 | 0,068 | |
| CM8T | 12,7 | 15.88 | 11.5 | 33.32 | 1/2-20 | 61.92 | 38.1 | 78.58 | 23.8 | 12 | 23.7 | 0.108 |
| 0,5000 | 0,625 | 0,453 | 1.312 | 1/2-20 | 2.438 | 1.500 | 3.093 | 0,937 | 12 | 23.7 | 0.108 | |
| CM10T | 15.875 | 19.05 | 12.29 | 38.1 | 5/8-18 | 66.68 | 41.28 | 85,73 | 28.575 | 16 | 25.7 | 0,163 |
| 0,6250 | 0,750 | 0,484 | 1.500 | 5/8-18 | 2.625 | 1.625 | 3.375 | 1.125 | 16 | 25.7 | 0,163 | |
| CM12T | 19.05 | 22.23 | 15.06 | 44.45 | 3/4-16 | 73.02 | 44.45 | 95.25 | 33.338 | 14 | 42.4 | 0.258 |
| 0,7500 | 0,875 | 0,593 | 1.750 | 3/4-16 | 2.875 | 1.750 | 3.750 | 1.312 | 14 | 42.4 | 0.258 | |
| CM14T | 22.225 | 22.23 | 15.06 | 50.8 | 7/8-14 | 85,73 | 47.63 | 111.1 | 33.338 | 14 | 70.8 | 0,408 |
| 0,8750 | 0,875 | 0,593 | 2.000 | 7/8-14 | 3.375 | 1,875 | 4.375 | 1.312 | 14 | 70.8 | 0,408 | |
Dapat memasok ujung batang dengan nada atau akurasi ulir yang berbeda.
Untuk ulir kiri, akhiran "L" ditambahkan ke nomor bantalan. misalnya: CML12T 3/4-16L
Request for Quotation
